JOC Machinery Co.,Ltd.

Search
Inquire Basket
Fully Owned Foundry
VIP
Get mail updates on new products
*

*

*

  • Home
  • >
  • Refrigerating Compressors
Sub-categories

Refrigerating Compressors

Product Name:
AS
Model:
AS
Description:
AS series 2-stage refrigeration compressors (Nominal Power: 7.5HP, 10HP, 13HP, 15HP, 20HP, 25HP, 35HP, 40HP) AS series 2-stage semi-hermetic refrigeration compressor is designed based on AR, AV, AW and AZ series compressors, and adopting 2-stage compressing technology and the inter-stage cooler. Its motor nominal power is 7.5HP-40HP, and discharge pressure at I/II stage respectively are: 27/13.5、33/16.5、40/20、51/35、71/35.5、86/43、103/51.5、128/42.5、153/51 . The series has the characteristics: 1. low load power, low discharge temperature 2. high efficient of cubage，etc. , which greatly improves the compressors operating in the condition of low evaporating temperature. It uses refrigerant HCFC22 to be capable of operating stably and chronically in the-50 centigrade evaporating temperature. Usage: They may widely apply to air conditioner, heat pump, and other industrial refrigerating system.
Product Name:
AV
Model:
AV
Description:
AV series 4-cylinder refrigeration compressors (Nominal Power: 15HP, 20HP, 25HP, 30HP) Features: 1. The compressors can operate stably and reliably with R22 or R134a, R404A, R507A and R407C. 2. Compact structure reasonable, parts highly standardized, easy in maintain, 3. Small vibration, stable operation with highly reliability. 4. The PTC temperature sensor is directly inserted into the discharge cavity of cylinder; the motor protector is adopted from Germany, which has delay circuit controlling the compressor to start five minutes after the sudden stop of compressor so that efficiently protect compressor from failure. Usage: Be widely used in the fields of air conditioner, hot pumps, industrial and commercial refrigeration.
Product Name:
AW
Model:
AW
Description:
AW series 6-cylinder refrigeration compressors (Nominal Power: 25HP, 30HP, 35HP, 40HP, 50HP) AW series compressors are the extension products of AC series compressors The nominal power of the series compressor is from 25 HP to 50 HP; Discharge volume with 3 specifications: 106 m3/h; 129 m3/h; 154 m3/h. This series have 6 specifications with evaporating temperature of 12.5℃ to -20℃ or –5℃ to –40℃. All can work stably with both HFC and R22. The refrigerating capacity with R22 is 10 kW to 204 kW. 1. Superb Design Technology the machine body and other key components processed by NC machining centers offer the powerful insurance for the precise operation and high-efficiency of compressors. 2. The Sweden steel valve plates are resistant-proof .The optimized structure of gas valves has the features of high efficiency, small resistance and long life. 3. The motors with insulation grade F, big size, high efficiency and rotation rate ensure the big refrigeration capacity, low power consumption and operational safety. 4. The big volume oil pump pressure lubricant system、advanced main shaft neck and seal structure and unique oil return system all ensure the reliability of compressor lubrication system 5. 6 cylinders and W structure and optimized balance design make the compressor small vibration, quiet. The standard design of shaft bushing and reasonable fixture design make the maintenance and dismantlement of compressors easier and convenient. 6. Perfect Safety Protection The reliable PTC thermal resistor sensors monitor the temperature of compressor winding during the compressor operation. The excessive temperature of motor caused by any fault will make the compressor stop automatically. The compressor will be allowed to restart in 5 minutes after the temperature is in the normal range. 7 safety attachment selections: Standard attachments:3-phase/4-pole/double-star connection electric motor（380V/3~/50Hz；440V/3~/60Hz）； Motor protection module :INT69TM（220V/1-50Hz）； Discharge temperature detector:PTC/140℃； Optional attachments: Motor with extra power requirement；Top cooling fan；Sprinkling cooling system；Oil cooling unit；Crank shaft case heater.
Product Name:
AZ series
Model:
AZ series
Description:
Product Name:
DLW water-cooled condensing unit
Model:
DLW water-cooled condensing unit
Description:
DLW water-cooled condenser units DLW condenser units use R22 as refrigerant. The low pressure pole uses two AR semi-hermetic refrigerating compressors in parallel while the high pressure pole uses one AM or AR semi-hermetic refrigerating compressor. The supplement of lubricant is done by oil level controller. The unit selects high efficient water-cooled condenser and plate type heat exchanger as center cooler. The units are also matched with particle filter, pressure and oil pressure controllers; safety, solenoid and expansion valves; fluid controller and Siemens PLC. Usage: Be widely equipped with the low temperature, fast freezing and environment test facilities in hospitals, schools, factories, miners, food industry and commercial line.
Product Name:
AC series comressors
Model:
AC series comressors
Description:
Product Name:
AW66
Model:
AW66
Description:
AW66 series butt-joint of 2 AW refrigeration compressors (Nominal Power: 50HP, 60HP, 70HP, 80HP, 100HP) Features: AW66 butt-joint series semi-hermetic refrigeration compressors are based on the connection between two 6-cylinder refrigeration compressors. With simple and compact structure, this series boasts double refrigerating capacity comparing to AW series. Its nominal power: 50HP-100HP. This series of compressor could be installed with 6-step device of energy adjustment, which enables the compressor to reach the maximum efficiency. Usage: It may widely apply to air conditioner, heat pump, and other industrial refrigerating system.
Product Name:
FSV-F series
Model:
FSV-F series
Description:
FSV2-F series 2-cylinder refrigeration compressors (Nominal Power: 2HP, 3HP, 4HP, 5HP, 7.5HP) Features: 1. Compact structure with light weight, small vibration and quiet 2. Excellent performance with 12000 hours faultless operation and 50000 hours life-span 3. Special oil return structure and cooled by in-taken steam, big over-load capacity and longer duration 4. Components highly standardized, easy in maintain 5. PTC protection Usages: Cold storage、freezing facilities and ice-cream machines and other cold drink facilities. Well adapted to all kinds of climates.
Product Name:
BL-220
Model:
BL-220
Description:
BL-220 3-flavor soft ice cream machine (20L/h, 220V/50Hz/1Phase, 2.0kw) Working Features: 1. flexible move(ice-cream) 2. easy operation with excellent performance 3. automatic production with high reliability 4. convenient air-cooling Notes: water or other special cooling methods are also available according to your demands Safety guidelines: The machine has been certificated by CE. All components are strictly controlled per relevant standards.
  • Address: 20/F.,26 North Zhongshan Rd.,Nanjing,China,210008
  • Contact Person: Peter Liu