Operation safety of CNC machining

The CNC machine tool is a kind of advanced processing equipment with a high degree of automation and a more complex structure. To give full play to the advantages of CNC machining machine tools, improve production efficiency, manage, use and repair CNC machine tools, the quality of technical personnel and civilized production appear especially important. In addition to being familiar with and mastering the performance of CNC machining machines, operators must also cultivate good working habits and rigorous work styles in civilized production and have good professional qualities, a sense of responsibility, and a spirit of cooperation. So what is the operating safety of CNC machining? Let's take a look together next.

Here is the content list:

Civilized production

Operating procedures

Civilized production

⑴ Strictly abide by the safe operation regulations of CNC machining machine tools. Do not operate the machine without professional training.

⑵ Strictly abide by the CNC machining commuting and shifting system.

⑶ Use and manage CNC machining well, and have a strong sense of work responsibility.

⑷Keep the environment around the CNC machining machine clean and tidy.

⑸CNC machining operators should wear work clothes and work shoes, and must not wear or wear dangerous clothing items.

Operating procedures

To use the CNC machining machine tool correctly and reasonably, reduce the incidence of its failure, and the method of operation. The CNC machining machine can be operated only with the consent of the machine tool manager.

1. Precautions before starting up

The CNC machining operator must be familiar with the performance and operation methods of the CNC machine tool. The machine tool can only be operated with the consent of the machine tool manager. Before turning on the CNC machining machine tool, check whether the voltage, air pressure, and oil pressure meet the working requirements. Check whether the movable part of the CNC machining machine tool is in a normal working state. Check whether the CNC machining workbench has an offside or limit state. Check whether the CNC machining electrical components are firm and whether there is any wiring off. Check whether the ground wire of the CNC machining machine tool is reliably connected to the ground wire of the workshop (especially important for the first startup). Turn on the main power switch only after the preparations before starting the machine have been completed.

2. Precautions during the boot process

Operate strictly by the startup sequence in the CNC machining machine manual. Under normal circumstances, you must first return to the machine reference point during the startup process to establish a machine tool as a standard system. After starting the machine, let the CNC machining machine run idle for more than 15 minutes to make the machine reach a balanced state. After the CNC machining machine is shut down, you must wait for more than 5 minutes before it can be turned on again. If there is no special situation, it is not allowed to frequently turn on or shut down at will.

3. Precautions during debugging

Edit, modify and debug the program. If it is the first piece of trail cutting, it must be a dry run to ensure that the CNC machining program is correct. Install and debug the CNC machining fixture according to the process requirements, and remove the iron filings and debris on each positioning surface. CNC machining clamps the workpiece according to the positioning requirements to ensure that the CNC machining positioning is correct and reliable. Do not loosen the workpiece during processing. Install the CNC machining tool to be used. If it is a machining center, the tool position number on the tool magazine must be strictly consistent with the tool number in the program. Set the tool according to the origin of CNC machining programming on the workpiece, and establish the workpiece coordinate system. If multiple tools are used, the remaining tools will be compensated for length or tip position respectively.

JOC Machinery Co., Ltd. was founded in the year 2000, specializing in foreign trade of machinery parts and complete sets of equipment. The above is about the operation safety of CNC machining. If you are interested in CNC machining services, CNC machining center, CNC machining china and custom CNC machining, you can contact us. Our website is http://www.jocmachinery.com. I look forward to your coming and hope to cooperate with you.