English 
Views: 0 Author: Site Editor Publish Time: 20-05-2025 Origin: Site
Rubber tracks have revolutionized how modern agricultural and construction equipment operate—offering better traction, reducing ground disturbance, and increasing machine versatility. But to fully benefit from these advantages, one crucial factor must be addressed: choosing the right rubber track size. If you're working with excavators, bulldozers, or other track-based machinery, understanding how to measure and size rubber tracks is essential for optimal performance and safety.
This comprehensive guide will walk you through the process of rubber track sizing, with a focus on agricultural machinery parts and construction equipment. We'll also explore rubber track solutions, sizing charts, components like rubber track pads, and how to work with rubber track suppliers to get the right fit for your machine. Whether you're looking to replace a worn-out excavator rubber track or upgrade your rubber track dozer, this article is your go-to resource.
Incorrectly sized rubber tracks can lead to severe machine issues, including misalignment, undercarriage damage, increased fuel consumption, and even safety hazards. For agricultural machinery, poor sizing can result in soil compaction, reduced crop yields, and inefficient field operations. In construction, the wrong track can cause slippage, breakdowns, and delays on the job site.
Some of the key reasons proper sizing is critical include:
Ensures optimal contact with the ground surface
Reduces wear and tear on sprockets and rollers
Improves traction and stability
Enhances machine lifespan
Prevents unnecessary downtime and replacement costs
Before diving into how to measure, it’s important to understand the parts of a rubber track system that influence sizing:
| Component | Function |
|---|---|
| Track Width | The overall width of the rubber track in millimeters |
| Pitch | The distance between the centers of two adjacent drive lugs |
| Number of Links | The total number of drive lugs (guide lugs) on the inner surface |
| Tread Pattern | Affects grip, traction, and performance on different terrains |
| Core Material | Steel cables or wire embedded in the rubber for strength and tension |
For example, in a 180×72×37 rubber track:
180 mm = track width
72 mm = pitch
37 = number of links
To size a rubber track accurately, follow these steps:
Use a tape measure to get the exact width of the rubber track across its outer edge. This is typically measured in millimeters (e.g., 180 mm, 230 mm, 300 mm).
This is the distance between the centers of two adjacent drive lugs on the inside of the rubber track. Again, use millimeters.
Count how many drive lugs there are on the inside of the track. These are the teeth that engage with the sprocket.
Example:
If you measure a track width of 180 mm, a pitch of 72 mm, and count 37 links, the track size would be: 180×72×37 rubber track.
Different machines require different track sizes and tread patterns based on their weight, function, and terrain. Here's a general comparison guide:
| Machine Type | Common Track Size | Notes |
|---|---|---|
| Mini Excavator | 180×72×37, 230×72×42 | Focus on durability and tight turning |
| Compact Track Loader | 450×86×55 | Wider tracks for better flotation |
| Rubber Track Bulldozer | 320×100×42 | Deep tread for traction on rough terrain |
| Agricultural Tractor | 400×90×50 or custom sizes | Soil-friendly tread, wider profile |
| Rubber Track Dozer | 500×92×52 | Designed for pushing and grading |
Always consult your equipment manual or existing track markings before purchasing a replacement.
The 180×72×37 rubber track is one of the most commonly used sizes for compact agricultural and construction machines. Let’s break it down:
180 mm = Narrow width for compact equipment
72 mm = Standard pitch, offers balanced performance
37 = Suitable number of links for smaller undercarriage systems
This size is frequently used on mini excavators and light tractors, offering excellent maneuverability and reduced ground pressure.
Track tread patterns are not just for aesthetics—they directly impact performance. When selecting rubber tracks for your machine, consider the following:
| Tread Type | Best For | Characteristics |
|---|---|---|
| C-Lug | General-purpose | Balanced traction and smooth ride |
| Straight Bar | Soft soils, agriculture | Aggressive grip, less soil disturbance |
| Block | Pavement, landscaping | Reduced vibration, quiet operation |
| Zig-Zag | Muddy or snowy terrain | Self-cleaning, high traction |
Agricultural machinery parts often require straight bar or zig-zag patterns to improve traction in wet or soft fields.
Track pads are crucial components that bolster the performance of rubber tracks and help reduce surface wear. There are various types:
Bolt on rubber track pads: Easy to replace and widely used
Clip on pads: Ideal for quick changes without tools
Chain on pads: Integrated with the track chain
When sizing rubber track pads, ensure they match the width and pitch of your existing tracks. For example, 180 mm wide tracks would need pads of the same width to maintain balance and undercarriage geometry.
Excavator rubber track pads must also be durable enough to withstand the impact forces during digging and swinging operations.
Replacing or installing rubber tracks isn’t just about size—it’s about having the right tools. A rubber track removal tool makes the process easier, safer, and more efficient.
Tips for installation:
Always lift the machine off the ground before removal
Release tension via the grease fitting or tension bolt
Use a jack or pry bar to guide the track off the sprockets
Inspect rollers, sprockets, and idlers before installing new tracks
Using the right tools helps prevent damage to both the track and undercarriage components.
Sizing rubber tracks seems straightforward, but mistakes are common. Here's what to avoid:
Relying on visual estimation instead of measuring
Ignoring pitch and number of links
Overlooking track tension requirements
Mixing and matching incompatible track pads
Forgetting to account for machine weight and terrain type
Incorrect sizing can lead to premature wear, poor traction, and even track failure during operation.
When sourcing rubber tracks, it’s critical to work with trusted rubber track manufacturers and suppliers. Here's what to look for:
| Factor | Why It Matters |
|---|---|
| ISO Certification | Assures quality and consistency |
| Product Range | Ensures availability of various sizes like 180×72×37 |
| After-Sales Support | Helps with installation and warranty claims |
| Customization Options | Tailored tracks for unique machinery |
| Global Shipping | Especially important for international buyers |
Top rubber track suppliers will offer not just tracks, but also components like pads, removal tools, and undercarriage kits.
JOC Machinery Co., Ltd. provides a wide range of agricultural machinery parts, including high-quality rubber tracks and related components. With over two decades of experience and ISO9001/TS16949-certified production, JOC serves customers across 40+ countries.
Highlights of JOC’s rubber track solutions:
Full-size range including 180×72×37 rubber track
Bolt-on rubber track pads for excavators and dozers
CNC-machined undercarriage components
Custom solutions for tractors, harvesters, and planters
Consistent rubber track supply across global markets
Explore their product catalog tailored for agricultural applications here: JOC Agricultural Machinery Parts
Here’s a quick overview of common track sizes and their applications:
| Track Size (mm) | Pitch (mm) | Links | Application |
|---|---|---|---|
| 180×72×37 | 72 | 37 | Mini excavators, compact tractors |
| 230×72×42 | 72 | 42 | Mid-size skid steers |
| 300×52×84 | 52 | 84 | Compact loaders |
| 320×100×42 | 100 | 42 | Bulldozers, graders |
| 450×86×55 | 86 | 55 | Track loaders, multi-terrain vehicles |
Always verify with your machine’s manual or contact the manufacturer for exact sizing.
Q1: How do I know what size rubber track I need?
A1: Measure the track width, pitch (distance between internal lugs), and count the number of lugs. The format is usually written as Width × Pitch × Links.
Q2: What does 180×72×37 rubber track mean?
A2: It means the track is 180 mm wide, has a pitch of 72 mm, and includes 37 drive lugs or internal links. This size fits many compact excavators and small agricultural machines.
Q3: Can I use any rubber track on my machine?
A3: No. Tracks must match your machine’s size specifications, weight class, and undercarriage type. Using incorrect tracks can damage components and reduce performance.
Q4: What are bolt on rubber track pads used for?
A4: Bolt-on pads attach to steel or rubber tracks to reduce damage to paved surfaces and improve grip. They're commonly used in urban construction or agriculture.
Q5: How do I remove a rubber track?
A5: Use a rubber track removal tool to release tension and guide the track off the sprockets. Always lift the machine and follow safety protocols.
Q6: Where can I buy high-quality rubber tracks?
A6: Trusted rubber track suppliers like JOC Machinery offer a wide range of track sizes, OEM compatibility, global shipping, and after-sales support.
Q7: How often should I replace rubber tracks?
A7: Rubber tracks typically last 1,200–1,600 hours under normal use. Replace them when you notice deep cracks, exposed cords, or loss of tread.
Sizing rubber tracks correctly is more than just a maintenance task—it’s a key performance factor for your machinery. Whether you're running a mini excavator, rubber track bulldozer, or agricultural tractor, the right track ensures efficiency, longevity, and safety.
By following the steps outlined in this guide, using the proper tools, and working with reputable rubber track manufacturers like JOC Machinery, you ensure your investment pays off in the long run.
