Classification of simplicity tractor parts

The simplicity of tractor parts realizes variable-angle power transmission. Used to change the position of the drive shaft. It is the "joint" part of the universal transmission of the car drive system. The combination of the universal joint and the drive shaft of the tractor part is called the universal joint drive. So what are the classifications of simplicity tractor parts? Let's take a look together below.

The following is a list of contents:

Simplicity tractor parts variable speed universal joint

Simplicity tractor parts quasi constant velocity universal joint

Simplicity tractor parts variable speed universal joint

When the angle between the two shafts of the farm tractor parts universal joint is greater than zero, the output shaft and the input shaft transmit motion at a certain speed. The instantaneous angular velocity ratio is variable, but the average angular velocity is equal to the universal joint. Farm tractor parts the cross shaft rigid universal joint is composed of the universal joint fork, cross shaft, needle bearing, oil seal, shaft sleeve, bearing cover, and other components. The working principle of the cross shaft rigid universal joint is that one rotating fork drives another fork to rotate through the cross shaft, and at the same time, it can swing in any direction around the center of the cross. The needle in the needle bearing can rotate by itself during the rotation process to reduce friction. The shaft connected with the input power is called the input shaft (also called the driving shaft), and the shaft output through the universal joint is called the output shaft (also called the driven shaft). Working with the angle between the input and output shafts, the angular velocities of the two shafts are not equal, which will cause the output shaft and the transmission components connected to it to produce torsional vibration and affect the life of these components.

Simplicity tractor parts quasi constant velocity universal joint

Simplicity tractor parts quasi-constant velocity universal joint refers to a universal joint that transmits motion at an equal instantaneous angular velocity at a design angle and transmits motion at a design angle. The instantaneous angular velocity is approximately equal at other angles. It is divided into:

1. Simplicity tractor parts double quasi constant velocity universal joint refers to the universal joint when the length of the transmission shaft in the universal joint constant velocity transmission device is shortened to the minimum.

2. The convex quasi-constant velocity universal joint of simplicity tractor parts is composed of two universal joints and two convex blocks of different shapes. These two protrusions are equivalent to the intermediate driveshaft and two horizontal pins in the double universal joint device.

3. The three-pin tractor parts quasi-constant velocity universal joint is composed of two three-pin shafts, one active eccentric shaft fork, and one driven eccentric shaft fork.

4. Spherical roller type quasi-constant velocity tractor parts universal joint is composed of pin shaft, spherical roller, Cardan shaft, and cylinder. The spherical roller type quasi-constant velocity universal joint rollers of tractor parts can move axially in the groove and play the role of the telescopic spline. The roller contacts the groove wall to transmit torque.

JOC Machinery Co., Ltd. was established in 2000, specializing in the foreign trade business of mechanical parts and complete sets of equipment. The above is about the classification of the universal joints of simplicity tractor parts. If you are interested in case tractor parts, international tractor parts, Farmall tractor parts, simplicity tractor parts, big tractor parts, you can contact us. Our website is http://www.jocmachinery.com.