English 
 PROCESS | MATERIAL | |
| Lost Foam Casting | Ductile iron GGG 40 to GGG 80 / Grey Iron | |
| Carbon steel 1025 to 1045 | ||
| ASTM 60-40-18 / 65-45-12 / 80-55-06 / 100-70-03 | ||
| Austempering ductile iron | ||
| Heat resistant steel / Wear resistant steel | ||
| Sand Casting | Green Sand | Grey Iron, Ductile Iron, Malleable Iron, Stainless Steel, Carbon, Steel, Aluminium, Brass, Bronze |
| Furan Resin Sand | ||
| Cold Harden Resin Sand | ||
| Investment Casting | Sodium Silicone | Stainless Steel, Carbon Steel, Special Alloy Steel Bronze, Brass, Aluminum |
| (Water glass) | ||
| Silica Sol | ||
| Forging | Hammer Forging | Stainless Steel, Carbon Steel, Alloy Streel, Brass, Aluminum |
| Die Forging | ||
| Roll Forging | ||
| Die Casting | High Pressure Die Casting | Aluminum, Zinc |
| Low Pressure Die Casting | ||
| Gravity Pressure Die Casting | ||
| Surface Finish | Shot blast, chromate plating, power coated and anodizing | |
| Machining | Lathe, planer, drilling machine, tapping machine, line cutting, milling machine, CNC machining center. | |
| Inspection | Test equipment: Optical Spectrum Analyzer, CMM, Hardness test equipment, Tensile test machine. | |
| PROCESS | MATERIAL | |
| Lost Foam Casting | Ductile iron GGG 40 to GGG 80 / Grey Iron | |
| Carbon steel 1025 to 1045 | ||
| ASTM 60-40-18 / 65-45-12 / 80-55-06 / 100-70-03 | ||
| Austempering ductile iron | ||
| Heat resistant steel / Wear resistant steel | ||
| Sand Casting | Green Sand | Grey Iron, Ductile Iron, Malleable Iron, Stainless Steel, Carbon, Steel, Aluminium, Brass, Bronze |
| Furan Resin Sand | ||
| Cold Harden Resin Sand | ||
| Investment Casting | Sodium Silicone | Stainless Steel, Carbon Steel, Special Alloy Steel Bronze, Brass, Aluminum |
| (Water glass) | ||
| Silica Sol | ||
| Forging | Hammer Forging | Stainless Steel, Carbon Steel, Alloy Streel, Brass, Aluminum |
| Die Forging | ||
| Roll Forging | ||
| Die Casting | High Pressure Die Casting | Aluminum, Zinc |
| Low Pressure Die Casting | ||
| Gravity Pressure Die Casting | ||
| Surface Finish | Shot blast, chromate plating, power coated and anodizing | |
| Machining | Lathe, planer, drilling machine, tapping machine, line cutting, milling machine, CNC machining center. | |
| Inspection | Test equipment: Optical Spectrum Analyzer, CMM, Hardness test equipment, Tensile test machine. | |
